The Steel
This new series of models were designed for hard use and not fail you when you need them the most. All these full tang knives are made from 52100, a steel that I have been using since 1996. I have used this steel to pass my performance tests for the Journeyman and Mastersmith tests of the ABS and to win a lot of the cutting competitions of the ABS Hammer-Ins. It was used to placed first in the 5″ hunting knife, 8″ tactical, 10″ regular cutting and the first First Place at the Spirit of Steel with a 10″ damascus blade of 52100 and 15N20.
The flats on these knives have been left in the as forged condition and after grinding, heat treated and bead blasted, a coat of tool black is applied. These knives have a forged in finger guard, thumb notches, tong hole, and fire steel striker notch on butt. The blades and short section of the butt are differentially heat treated. The blades are then oiled and finished. The two smaller ones have a fire steel under the Para cord wrapped handle and the larger one has a horse stall mat for the handles. The horse stall mat is the same material that a lot of the competition cutters use for hard use cutting and is a compressible hard rubber . Below is a list of the blades with pics.
BOB III
Knife – blade of 3 1/4″ and OAL of 7 1/4″ — $215.00.00 ea.
Weight: 4 to 4.6 ounces 8 – 31 – 11
Kydex sheath (.063″ front and back) with Tek-Lok belt attachment.
BOB II
Knife – Blade of 4 1/2″ and OAL of 10″ —– $255.00.00
Kydex sheath (.092″ back and .063″ front) with Tek-Loc belt attachment.
OUT OF STOCK
BOB I
Knife – Blade of 7″ and OAL of 12 1/2″ —- $375.00
Kydex sheath (.092″ back and .063″ front) with Tek-Loc belt attachment.
OUT OF STOCK